/**
  ******************************************************************************
  * @file    main.h
  * @author  MCU Application Team
  * @brief   Header for main.c file.
  *          This file contains the common defines of the application.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2023 Puya Semiconductor Co.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by Puya under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "py32f002b_ll_rcc.h"
#include "py32f002b_ll_bus.h"
#include "py32f002b_ll_system.h"
#include "py32f002b_ll_cortex.h"
#include "py32f002b_ll_utils.h"
#include "py32f002b_ll_pwr.h"
#include "py32f002b_ll_gpio.h"
#include "py32f002b_ll_adc.h"
#include "py32f002b_ll_tim.h"
#include "py32f002b_ll_i2c.h"
#include "py32f002b_ll_spi.h"
#include "py32f002b_ll_exti.h"
#include "py32f0xx_hal.h"

#if defined(USE_FULL_ASSERT)
#include "py32_assert.h"
#endif /* USE_FULL_ASSERT */

/* Private includes ----------------------------------------------------------*/
/* Private defines -----------------------------------------------------------*/
// #define I2C_ADDRESS        0xA0     /* Master\Slave Address */
// #define I2C_SPEEDCLOCK     400000   /* Communication frequency:400K */
// #define I2C_STATE_READY    0        /* Ready state */
// #define I2C_STATE_BUSY_TX  1        /* Send state */
// #define I2C_STATE_BUSY_RX  2        /* Receive state */


#define HW_KEY_NULL 		( 0)  
#define HW_KEY_A 			  ( 1UL<<0)
#define HW_KEY_B 			  ( 1UL<<1)
#define HW_KEY_C 			  ( 1UL<<2)
#define HW_KEY_X 			  ( 1UL<<3)
#define HW_KEY_Y 			  ( 1UL<<4)
#define HW_KEY_Z 			  ( 1UL<<5)
#define HW_KEY_L1 			( 1UL<<6)
#define HW_KEY_R1 			( 1UL<<7)
#define HW_KEY_L2 			( 1UL<<8)
#define HW_KEY_R2 			( 1UL<<9)
#define HW_KEY_SELECT 	( 1UL<<10)
#define HW_KEY_START 		( 1UL<<11)
#define HW_KEY_HOME 		( 1UL<<12)
#define HW_KEY_L3 			( 1UL<<13)			
#define HW_KEY_R3 			( 1UL<<14)
#define HW_KEY_CAPTURE 	( 1UL<<15)		//截图/返回/touchkey

#define HW_KEY_UP 			( 1UL<<16)		
#define HW_KEY_DOWN 		( 1UL<<17)
#define HW_KEY_LEFT 		( 1UL<<18)
#define HW_KEY_RIGHT 		( 1UL<<19)
#define HW_KEY_BACK 		( 1UL<<20)		//功能按键
#define HW_KEY_MODE 		( 1UL<<21)		//功能按键
#define HW_KEY_MENU 		( 1UL<<22)		//功能按键
#define HW_KEY_M1 		  ( 1UL<<23)
#define HW_KEY_M2		    ( 1UL<<24)
#define HW_KEY_M3 			( 1UL<<25)
#define HW_KEY_M4 		  ( 1UL<<26)
#define HW_KEY_M5 		  ( 1UL<<27)
#define HW_KEY_M6 		  ( 1UL<<28)
#define HW_KEY_M7 		  ( 1UL<<29)
#define HW_KEY_M8 		  ( 1UL<<30)
#define HW_KEY_POWER 		( 1UL<<31)		//POWER

/* Exported variables prototypes ---------------------------------------------*/
/* Exported functions prototypes ---------------------------------------------*/
void APP_ErrorHandler(void);
void APP_SpiRxCallback(void);
void APP_SpiTxCallback(void);
void APP_SpiTransferErrorCallback(void);
void APP_Spi_CS_EN(uint8_t en);
#ifdef __cplusplus
}
#endif

#endif /* __MAIN_H */

/************************ (C) COPYRIGHT Puya *****END OF FILE******************/